一种超导重力仪磁悬浮力的等效计算

为实现超导重力仪磁悬浮力的精确计算,以GWR型超导重力仪为模型基础,采用有限元的思想,将超导球表面电流理想化为多个等高共轴电流环,计算出各个电流环与超导线圈的作用力,求和得到线圈与超导球间的磁悬浮力。利用MATLAB完成计算程序实现,通过改变下线圈电流和上、下线圈电流比,获得满足一定条件的磁悬浮力及其梯度。选取合适的模型参数,计算出线圈对质量为m=4.069 g超导球的磁悬浮力大小为:Ftotal=3.988×10^-2N,磁悬浮力梯度为:-9.699×10^-3N/m,此时悬浮力梯度合适,满足系统稳定性和灵敏度的要求。     

On idempotents of a class of commutative rings

Abstract

In the present work, a procedure for determining idempotents of a commutative ring having a sequence of ideals with certain properties is presented. As an application of this procedure, idempotent elements of various commutative rings are determined. Several examples are included illustrating the main results.     

The Crank–Nicolson finite spectral element method and numerical simulations for 2D non-stationary Navier–Stokes equations

In this paper, we first build a semi-discretized Crank–Nicolson (CN) model about time for the two-dimensional (2D) non-stationary Navier–Stokes equations about vorticity–stream functions and discuss the existence, stability, and convergence of the time semi-discretized CN solutions. And then, we build a fully discretized finite spectral element CN (FSECN) model based on the bilinear trigonometric basic functions on quadrilateral elements for the 2D non-stationary Navier–Stokes equations about the vorticity–stream functions and discuss the existence, stability, and convergence of the FSECN solutions. Finally, we utilize two sets of numerical experiments to check out the correctness of theoretical consequences.     

基于持续同调的边坡土颗粒应力链失稳分析

采用颗粒离散元方法和持续同调理论,研究了内排土场堆叠至不同高度时的边坡稳定性。为便于研究,现采用一水平金属板向下施加压力,代替不同厚度土层的重力荷载,对边坡在竖向荷载作用下的失稳破坏过程进行了颗粒离散元模拟。研究了二维边坡土颗粒速度总矢量、边坡失稳破坏时滑移开裂面的角度以及边坡坡顶y方向的平均速度等宏观响应过程,并构建了自然堆积下边坡堆积体颗粒的法向力链无向网络模型。最后,用持续同调方法对边坡坡顶颗粒接触力链网络的拓扑特征进行分析,获得条码图,建立了岩体结构持续同调特征与失稳演化的关系。本文为研究边坡失稳拓扑识别提供了一种新方法,从而可以有效预测边坡的失稳破坏。     

Three-dimensional interfacial fracture analysis of a one-dimensional hexagonal quasicrystal coating

In this paper, the three-dimensional (3D) interfacial fracture is analyzed in a one-dimensional (1D) hexagonal quasicrystal (QC) coating structure under mechanical loading. A planar interface crack with arbitrary shape is studied by a displacement discontinuity method. Fundamental solutions of interfacial concentrated displacement discontinuities are obtained by the Hankel transform technique, and the corresponding boundary integral-differential equations are constructed with the superposition principle. Green’s functions of constant interfacial displacement discontinuities within a rectangular element are derived, and a boundary element method is proposed for numerical simulation. The singularity of stresses near the crack front is investigated, and the stress intensity factors (SIFs) as well as energy release rates (ERRs) are determined. Finally, relevant influencing factors on the fracture behavior are discussed.     

Impedance Response of a Thin Film on an Electrode: Deciphering the Influence of the Double Layer Capacitance

The different contributions of the interfacial capacitance are identified in the case of passive materials or thin protective coatings deposited on the electrode surface. The method is based on a graphical analysis of the EIS results to determine both the passive-film capacitance in the high-frequency domain and the double-layer capacitance in the low-frequency domain. The proposed analysis is shown to be independent of the physicochemical origins of the frequency dispersion of the interfacial capacitances which results, from an analysis point of view of the experimental results, in the use of a constant-phase element However, for a correct evaluation of the thin-film properties such as its thickness, the high-frequency data must be corrected for the double-layer contribution. In particular, it is shown that if the double-layer capacitance gives a frequency-dispersed response, it is necessary to correct the high-frequency part for the double-layer constant-phase elements. This is first demonstrated on synthetic data and then used for the determination of the thickness of thin oxide film formed on Al in neutral pH solution.     

基于拟相对内部集值优化问题弱有效元的最优性条件

本文研究了基于拟相对内部的非凸集值优化问题弱有效元的最优性条件.首先,讨论了弱有效元与线性子空间之间的关系,利用涉及拟相对内部的凸集分离定理,获得了弱有效元的最优性条件.其次,给出了基于拟相对内部弱有效元的Lagrange乘子定理.     

Electrocatalytic Hydrogen Evolution Using A Molecular Antimony Complex under Aqueous Conditions: An Experimental and Computational Study on Main-Group Element Catalysis

Electrocatalytic hydrogen gas production is considered a potential pathway towards carbon-neutral energy sources. However, the development of this technology is hindered by the lack of efficient, cost-effective, and environmentally benign catalysts. In this study, a main-group-element-based electrocatalyst, SbSalen , is reported to catalyze the hydrogen evolution reaction (HER) in an aqueous medium. The heterogenized molecular system achieved a Faradaic efficiency of 100 % at −1.4 V vs. NHE with a maximum current density of −30.7 mA/cm². X-ray photoelectron spectroscopy of the catalyst-bound working electrode before and after electrolysis confirmed the molecular stability during catalysis. The turnover frequency was calculated as 43.4 s⁻¹ using redox-peak integration. The kinetic and mechanistic aspects of the electrocatalytic reaction were further examined by computational methods. This study provides mechanistic insights into main-group-element electrocatalysts for heterogeneous small-molecule conversion.